Call us at +91 712 272 9130 -136
 
 
Home | Careers | Contact Us | Feedback | Vendors
 
 
Grace Industries Limited
‘GRACE INDUSTRIES LTD' (GIL) is Subsidiary concern of Sanvijay Rolling & Engg. Ltd. (SREL), acquired in year 2007, Located in Tadali, Chandrapur. GIL has a setup of 4 x 100 TPD DRI Kilns for production of high grade Sponge Iron and 25 + 8 (33) MW Captive Power Plant.

“GRACE INDUSTRIES LITD” is now a wholly owned subsidiary of Sanvijay Rolling & Engineering Limited. The brief highlights of GIL are as given below:
 
 
 
Nature of Business:
Direct Reduced Iron (DRI) , Sponge Iron Plant
Power Plant
 
 
 
 
Capacity:
4 X 100 TPD Sponge Iron (DRI) Kilns
33 MW Captive Power Plant having 25 MW through Thermal Generation & 8 MW through Waste Heat Recovery Method.
 
 
 
 
 
Highlights:
Associate company of Sanvijay Rolling & Engineering Ltd.
Self sufficient in power with own captive power plants - producing 33 MW of power
4 X 100 TPD, Beckons make DRI Kilns
Thermax make Boilers 4 WHRB (4 X 10 TPH) & 1 AFBC ( 1 X 100 TPH)
2 Steam Turbine Generators, SIEMENS make ( 8 MW + 25 MW)
ACC- GEI Make
Cooling Tower- Paharpur
ESPs (Thermax Make)
For fly ash utilization, in-house fly ash brick plant is installed in the plant premises.
 
 
 
After consuming the generated power for self use at plant site, surplus power shall be wheeled and utilized at their induction furnace and rolling mills located at Butibori, Nagpur through 220KV grid under open access scheme, and remaining power shall be sold to third party/MSEDCL.
 
 
 
Advantages of GIL Steel's Sponge Iron / DRI
High Fe Content and high degree of metallization.
Uniform and Consistent quality.
Minimum dust generation during handling.
Good flow ability in bins and conveyors for continuous and trouble free charging.
Technical Support to Furnace operators.
Various properties of sponge iron typically produced at GIL Sponge:
 
 
 
 
Constituent Percentage
A. Chemical  
Fe, Metallization 79 ± 1 %
Sulphur 0.07 % max.
Phosphorus 0.04 % max.
Carbon 0.10 to 0.25 %
Gangue content 6 to 8 %
B. Physical  
Size
Lump
Fines
+3 mm
0-3 mm
Bulk density 1.9-2.2 MT / m3
 
 
       
                 
       
                 
           
                 
 
                 
                 
                 
                 
   
 
 
 
  Feedback | Site Map | Privacy Statement | Copyright @ 2015. All Rights Reserved.